HWiNFO32 v7.30-4870 |
Creation Time | 02.10.2022 13:59 |
Content: |
GERICOM-XP |
[Current Computer] | ||
Computer Name: | GERICOM-XP | |
Computer Brand Name: | Gericom P14G | |
[Operating System] | ||
Operating System: | Microsoft Windows XP Professional Build 2600 | |
Service Pack: | Service Pack 3 | |
UEFI Boot: | Not Present | |
Secure Boot: | Not Capable | |
Hypervisor-protected Code Integrity (HVCI): | Disabled | |
Central Processor(s) |
[CPU Unit Count] | ||
Number Of Processor Packages (Physical): | 1 | |
Number Of Processor Cores: | 1 | |
Number Of Logical Processors: | 1 |
Intel Pentium 4-M -1800 |
[General Information] | ||
Processor Name: | Intel Pentium 4-M -1800 | |
Original Processor Frequency: | 1800.0 MHz | |
Original Processor Frequency [MHz]: | 1800 | |
CPU ID: | 00000F24 | |
CPU Brand Name: | Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz | |
CPU Vendor: | GenuineIntel | |
CPU Stepping: | B0 | |
CPU Code Name: | Mobile Northwood | |
CPU Technology: | 130 nm | |
CPU S-Spec: | SL6CJ, SL65Q, SL69D | |
CPU Thermal Design Power (TDP): | 30/20.8 W | |
CPU Type: | Production Unit | |
CPU Platform: | mPGA478 (Micro-FCPGA) | |
Microcode Update Revision: | 20 | |
Number of CPU Cores: | 1 | |
Number of Logical CPUs: | 1 | |
[Operating Points] | ||
CPU LFM (Minimum): | 1200.0 MHz = 12 x 100.0 MHz | |
CPU HFM (Base): | 1800.0 MHz = 18 x 100.0 MHz [Locked] | |
CPU Current: | 1791.1 MHz = 18 x 99.5 MHz | |
CPU Bus Type: | FSB (QDR) | |
[Cache and TLB] | ||
L1 Cache: | Instruction Trace: 12K uOps, Data: 8 KBytes | |
L2 Cache: | Integrated: 512 KBytes | |
Instruction TLB: | 4KB/2MB/4MB Pages, Fully associative, 64 entries | |
Data TLB: | 4KB/4MB Pages, Fully associative, 64 entries | |
[Standard Feature Flags] | ||
FPU on Chip | Present | |
Enhanced Virtual-86 Mode | Present | |
I/O Breakpoints | Present | |
Page Size Extensions | Present | |
Time Stamp Counter | Present | |
Pentium-style Model Specific Registers | Present | |
Physical Address Extension | Present | |
Machine Check Exception | Present | |
CMPXCHG8B Instruction | Present | |
APIC On Chip / PGE (AMD) | Not Present | |
Fast System Call | Present | |
Memory Type Range Registers | Present | |
Page Global Feature | Present | |
Machine Check Architecture | Present | |
CMOV Instruction | Present | |
Page Attribute Table | Present | |
36-bit Page Size Extensions | Present | |
Processor Number | Not Present | |
CLFLUSH Instruction | Present | |
Debug Trace and EMON Store | Present | |
Internal ACPI Support | Present | |
MMX Technology | Present | |
Fast FP Save/Restore (IA MMX-2) | Present | |
Streaming SIMD Extensions | Present | |
Streaming SIMD Extensions 2 | Present | |
Self-Snoop | Present | |
Multi-Threading Capable | Present | |
Automatic Clock Control | Present | |
IA-64 Processor | Not Present | |
Signal Break on FERR | Not Present | |
Virtual Machine Extensions (VMX) | Not Present | |
Safer Mode Extensions (Intel TXT) | Not Present | |
Streaming SIMD Extensions 3 | Not Present | |
Supplemental Streaming SIMD Extensions 3 | Not Present | |
Streaming SIMD Extensions 4.1 | Not Present | |
Streaming SIMD Extensions 4.2 | Not Present | |
AVX Support | Not Present | |
Fused Multiply Add (FMA) | Not Present | |
Carryless Multiplication (PCLMULQDQ)/GFMUL | Not Present | |
CMPXCHG16B Support | Not Present | |
MOVBE Instruction | Not Present | |
POPCNT Instruction | Not Present | |
XSAVE/XRSTOR/XSETBV/XGETBV Instructions | Not Present | |
XGETBV/XSETBV OS Enabled | Not Present | |
Float16 Instructions | Not Present | |
AES Cryptography Support | Not Present | |
Random Number Read Instruction (RDRAND) | Not Present | |
Extended xAPIC | Not Present | |
MONITOR/MWAIT Support | Not Present | |
Thermal Monitor 2 | Not Present | |
Enhanced SpeedStep Technology | Not Present | |
L1 Context ID | Not Present | |
Send Task Priority Messages Disabling | Not Present | |
Processor Context ID | Not Present | |
Direct Cache Access | Not Present | |
TSC-deadline Timer | Not Present | |
Performance/Debug Capability MSR | Not Present | |
IA32 Debug Interface Support | Not Present | |
64-Bit Debug Store | Not Present | |
CPL Qualified Debug Store | Not Present | |
[Extended Feature Flags] | ||
64-bit Extensions | Not Present | |
RDTSCP and TSC_AUX Support | Not Present | |
1 GB large page support | Not Present | |
No Execute | Not Present | |
SYSCALL/SYSRET Support | Not Present | |
[Enhanced Features] | ||
Thermal Monitor 1: | Supported, Enabled | |
Thermal Monitor 2: | Not Supported | |
Enhanced Intel SpeedStep (GV3): | Not Supported | |
Bi-directional PROCHOT#: | N/A | |
Extended Auto-HALT State C1E: | N/A | |
MLC Streamer Prefetcher | Not Supported | |
MLC Spatial Prefetcher | Not Supported | |
DCU Streamer Prefetcher | Not Supported | |
DCU IP Prefetcher | Not Supported | |
Intel Dynamic Acceleration (IDA) Technology: | Not Supported | |
Intel Dynamic FSB Switching: | Not Supported | |
Intel Turbo Boost Technology: | Not Supported | |
Programmable Ratio Limits: | Not Supported | |
Programmable TDC/TDP Limits: | Not Supported | |
Hardware Duty Cycling: | Not Supported | |
Intel Speed Select: | Not Supported | |
[Memory Ranges] | ||
Maximum Physical Address Size: | 36-bit (64 GBytes) | |
Maximum Virtual Address Size: | 32-bit (4 GBytes) | |
[MTRRs] | ||
Range 0-8000000 (0MB-128MB) Type: | Write Back (WB) |
Motherboard |
[Computer] | ||
Computer Brand Name: | Gericom P14G | |
[Motherboard] | ||
Motherboard Model: | Gericom P14G | |
Motherboard Chipset: | VIA VT8753 P4X266 + VT8233 | |
Motherboard Slots: | 1xAGP v2.0 | |
USB Version Supported: | v2.0 | |
[BIOS] | ||
BIOS Manufacturer: | American Megatrends | |
BIOS Date: | 04/02/01 | |
BIOS Version: | 07.00T | |
UEFI BIOS: | Not Capable | |
Super-IO/LPC Chip: | National Semiconductor PC87591 + VIA VT1211 | |
Trusted Platform Module (TPM) Chip: | Not Found |
Plug-and-Play System Nodes |
PCI Bus |
[General Information] | ||
Node Number: | 0 | |
Device ID: | PNP0A03 | |
Device Name: | PCI Bus | |
Device Type Code: | 060400 | |
[System Resources] | ||
I/O Port: | 04D0 | |
I/O Port: | 0CF8 | |
I/O Port: | 0022 | |
I/O Port: | 0072 | |
I/O Port: | 0400 | |
I/O Port: | 0800 | |
I/O Port: | 0880 | |
I/O Port: | 0C00 | |
I/O Port: | 004E | |
I/O Port: | 004F | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
System Board Extension |
[General Information] | ||
Node Number: | 1 | |
Device ID: | PNP0C01 | |
Device Name: | System Board Extension | |
Device Type Code: | 050000 | |
[System Resources] | ||
Memory Location: | 00000000-0009FBFF | |
Memory Location: | 0009FC00-0009FFFF | |
Memory Location: | 000F0000-000FFFFF | |
Memory Location: | 00100000-07FEFFFF | |
Memory Location: | 07FF0000-07FF7FFF | |
Memory Location: | 07FF8000-07FFFFFF | |
Memory Location: | FFF80000-FFFFFFFF | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
Programmable Interrupt Controller |
[General Information] | ||
Node Number: | 2 | |
Device ID: | PNP0000 | |
Device Name: | Programmable Interrupt Controller | |
Device Type Code: | 080001 | |
[System Resources] | ||
IRQ: | 2 | |
I/O Port: | 0020-0021 | |
I/O Port: | 00A0-00A1 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
DMA Controller |
[General Information] | ||
Node Number: | 3 | |
Device ID: | PNP0200 | |
Device Name: | DMA Controller | |
Device Type Code: | 080101 | |
[System Resources] | ||
DMA: | 4 | |
I/O Port: | 0000-000F | |
I/O Port: | 0080-0090 | |
I/O Port: | 0094-009F | |
I/O Port: | 00C0-00DE | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
System Timer |
[General Information] | ||
Node Number: | 4 | |
Device ID: | PNP0100 | |
Device Name: | System Timer | |
Device Type Code: | 080201 | |
[System Resources] | ||
IRQ: | 0 | |
I/O Port: | 0040-0043 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
RealTime Clock |
[General Information] | ||
Node Number: | 5 | |
Device ID: | PNP0B00 | |
Device Name: | RealTime Clock | |
Device Type Code: | 080301 | |
[System Resources] | ||
IRQ: | 8 | |
I/O Port: | 0070-0071 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
101/102-Key or MS Natural Keyboard |
[General Information] | ||
Node Number: | 6 | |
Device ID: | PNP0303 | |
Device Name: | 101/102-Key or MS Natural Keyboard | |
Device Type Code: | 090000 | |
[System Resources] | ||
IRQ: | 1 | |
I/O Port: | 0060 | |
I/O Port: | 0064 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
PC Speaker |
[General Information] | ||
Node Number: | 7 | |
Device ID: | PNP0800 | |
Device Name: | PC Speaker | |
Device Type Code: | 088000 | |
[System Resources] | ||
I/O Port: | 0061 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
Numeric Data Processor |
[General Information] | ||
Node Number: | 8 | |
Device ID: | PNP0C04 | |
Device Name: | Numeric Data Processor | |
Device Type Code: | 088000 | |
[System Resources] | ||
IRQ: | 13 | |
I/O Port: | 00F0-00FF | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Not Supported | |
Disableable Device: | Not Supported |
16550A-compatible UART Serial Port |
[General Information] | ||
Node Number: | 9 | |
Device ID: | PNP0501 | |
Device Name: | 16550A-compatible UART Serial Port | |
Device Type Code: | 070000 | |
[System Resources] | ||
IRQ: | 4 | |
I/O Port: | 03F8 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Supported | |
Disableable Device: | Supported |
[Unknown Model: PNP3076] |
[General Information] | ||
Node Number: | 10 | |
Device ID: | PNP3076 | |
Device Name: | [Unknown Model: PNP3076] | |
Device Type Code: | 070000 | |
[System Resources] | ||
IRQ: | 3 | |
DMA: | 6 | |
I/O Port: | 0E00 | |
I/O Port: | 0E80 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Supported | |
Disableable Device: | Supported |
Intel 82365 CardBus |
[General Information] | ||
Node Number: | 11 | |
Device ID: | PNP0E03 | |
Device Name: | Intel 82365 CardBus | |
Device Type Code: | 060500 | |
[System Resources] | ||
I/O Port: | 0000 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Supported | |
Disableable Device: | Supported |
Logitech PS/2 Port Mouse |
[General Information] | ||
Node Number: | 12 | |
Device ID: | PNP0F13 | |
Device Name: | Logitech PS/2 Port Mouse | |
Device Type Code: | 090200 | |
[System Resources] | ||
IRQ: | 12 | |
[Flags] | ||
Removable Device: | Not Present | |
Docking: | Not Supported | |
IPL: | Not Supported | |
Primary Input Device: | Not Capable | |
Primary Output Device: | Not Capable | |
Configurable Device: | Supported | |
Disableable Device: | Supported |
ACPI Devices |
Microsoft AC Adapter |
Device Name: | Microsoft AC Adapter |
ACPI Fixed Feature Button |
Device Name: | ACPI Fixed Feature Button |
Intel Processor |
Device Name: | Intel Processor |
Programmable interrupt controller |
Device Name: | Programmable interrupt controller | |
[Assigned Resources] | ||
I/O Port: | 0020 - 0021 | |
I/O Port: | 00A0 - 00A1 | |
[Alternative 1] | ||
I/O Port: | 0020 - 0021 | |
I/O Port: | 00A0 - 00A1 |
System timer |
Device Name: | System timer | |
[Assigned Resources] | ||
I/O Port: | 0040 - 0043 | |
IRQ: | 0 | |
[Alternative 1] | ||
I/O Port: | 0040 - 0043 | |
IRQ: | 0 |
Direct memory access controller |
Device Name: | Direct memory access controller | |
[Assigned Resources] | ||
I/O Port: | 0000 - 000F | |
I/O Port: | 0081 - 0083 | |
I/O Port: | 0087 | |
I/O Port: | 0089 - 008B | |
I/O Port: | 008F | |
I/O Port: | 00C0 - 00DF | |
DMA: | 4 | |
[Alternative 1] | ||
I/O Port: | 0000 - 000F | |
I/O Port: | 0081 - 0083 | |
I/O Port: | 0087 | |
I/O Port: | 0089 - 008B | |
I/O Port: | 008F | |
I/O Port: | 00C0 - 00DF | |
DMA: | 4 |
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard |
Device Name: | Standard 101/102-Key or Microsoft Natural PS/2 Keyboard | |
[Assigned Resources] | ||
I/O Port: | 0060 | |
I/O Port: | 0064 | |
IRQ: | 1 | |
[Alternative 1] | ||
I/O Port: | 0060 | |
I/O Port: | 0064 | |
IRQ: | 1 |
OEM PortI/O Driver |
Device Name: | OEM PortI/O Driver | |
[Assigned Resources] | ||
I/O Port: | 0180 - 0183 | |
[Alternative 1] | ||
I/O Port: | 0180 - 0183 |
Communications Port |
Device Name: | Communications Port | |
[Assigned Resources] | ||
I/O Port: | 03F8 - 03FF | |
IRQ: | 4 | |
[Alternative 1] | ||
I/O Port: | 03F8 - 03FF | |
IRQ: | 4 | |
[Alternative 2] | ||
I/O Port: | 02F8 - 02FF | |
IRQ: | 3 | |
[Alternative 3] | ||
I/O Port: | 03E8 - 03EF | |
IRQ: | 4 | |
[Alternative 4] | ||
I/O Port: | 02E8 - 02EF | |
IRQ: | 3 |
System speaker |
Device Name: | System speaker | |
[Assigned Resources] | ||
I/O Port: | 0061 | |
[Alternative 1] | ||
I/O Port: | 0061 |
PCI bus |
Device Name: | PCI bus | |
[Assigned Resources] | ||
I/O Port: | 0000 - 0CF7 | |
I/O Port: | 0D00 - FFFF | |
Memory Location: | 000A0000 - 000BFFFF | |
Memory Location: | 000C0000 - 000DFFFF | |
Memory Location: | 08000000 - FFDFFFFF | |
[Alternative 1] | ||
I/O Port: | 0000 - 0CF7 | |
I/O Port: | 0D00 - FFFF | |
Memory Location: | 000A0000 - 000BFFFF | |
Memory Location: | 000C0000 - 000DFFFF | |
Memory Location: | 08000000 - FFDFFFFF |
System CMOS/real time clock |
Device Name: | System CMOS/real time clock | |
[Assigned Resources] | ||
I/O Port: | 0070 - 0071 | |
IRQ: | 8 | |
[Alternative 1] | ||
I/O Port: | 0070 - 0071 | |
IRQ: | 8 |
Numeric data processor |
Device Name: | Numeric data processor | |
[Assigned Resources] | ||
I/O Port: | 00F0 - 00FF | |
IRQ: | 13 | |
[Alternative 1] | ||
I/O Port: | 00F0 - 00FF | |
IRQ: | 13 |
Microsoft ACPI-Compliant Embedded Controller |
Device Name: | Microsoft ACPI-Compliant Embedded Controller | |
[Assigned Resources] | ||
I/O Port: | 0062 | |
I/O Port: | 0066 | |
[Alternative 1] | ||
I/O Port: | 0062 | |
I/O Port: | 0066 |
Microsoft ACPI-Compliant Control Method Battery |
Device Name: | Microsoft ACPI-Compliant Control Method Battery |
ACPI Power Button |
Device Name: | ACPI Power Button |
ACPI Lid |
Device Name: | ACPI Lid |
ACPI Sleep Button |
Device Name: | ACPI Sleep Button |
PS/2 Compatible Mouse |
Device Name: | PS/2 Compatible Mouse | |
[Assigned Resources] | ||
IRQ: | 12 | |
[Alternative 1] | ||
IRQ: | 12 |
VIA Fast Infrared Controller |
Device Name: | VIA Fast Infrared Controller | |
[Assigned Resources] | ||
I/O Port: | 0E00 - 0E7F | |
I/O Port: | 0E80 - 0EFF | |
IRQ: | 3 | |
DMA: | 6 | |
[Alternative 1] | ||
I/O Port: | 0E00 - 0E7F | |
I/O Port: | 0E80 - 0EFF | |
IRQ: | 3 | |
IRQ: | 4 | |
DMA: | 5 | |
DMA: | 6 | |
DMA: | 7 |
SMBIOS DMI |
BIOS |
BIOS Vendor: | American Megatrends Inc. | |
BIOS Version: | 07.00T | |
BIOS Release Date: | 04/02/01 | |
BIOS Start Segment: | F000 | |
BIOS Size: | F000 | |
ISA Support: | Present | |
MCA Support: | Not Present | |
EISA Support: | Not Present | |
PCI Support: | Present | |
PC Card (PCMCIA) Support: | Present | |
Plug-and-Play Support: | Present | |
APM Support: | Present | |
Flash BIOS: | Present | |
BIOS Shadow: | Present | |
VL-VESA Support: | Not Present | |
ESCD Support: | Present | |
Boot from CD: | Present | |
Selectable Boot: | Present | |
BIOS ROM Socketed: | Present | |
Boot from PC Card: | Not Present | |
EDD Support: | Present | |
NEC PC-98 Support: | Not Present | |
ACPI Support: | Present | |
USB Legacy Support: | Present | |
AGP Support: | Present | |
I2O Boot Support: | Not Present | |
LS-120 Boot Support: | Present | |
ATAPI ZIP Drive Boot Support: | Present | |
IEE1394 Boot Support: | Not Present | |
Smart Battery Support: | Not Present | |
BIOS Boot Specification Support: | Present | |
Function key-initiated Network Service Boot Support: | Not Present | |
Targeted Content Distribution Support: | Not Present | |
UEFI Specification Support: | Not Present | |
Virtual Machine: | Not Present |
System |
System Manufacturer: | Gericom | |
Product Name: | P14G | |
Product Version: | 1.0 | |
Product Serial Number: | 00000000 |
Mainboard |
Mainboard Manufacturer: | Gericom | |
Mainboard Name: | P14G | |
Mainboard Version: | 1.0 | |
Mainboard Serial Number: | 00000000 |
System Enclosure |
Manufacturer: | Uknown Chassis Manufacture | |
Case Type: | Notebook | |
Version: | Version 1.00 | |
Serial Number: | 123456890 | |
Asset Tag Number: | 0123ABC |
Processor |
Processor Manufacturer: | Intel | |
Processor Version: | Intel(R) Pentium(R) 4 Processor | |
External Clock: | 100 MHz | |
Maximum Clock Supported: | 3000 MHz | |
Current Clock: | 1800 MHz | |
CPU Socket: | Populated | |
CPU Status: | Enabled | |
Processor Type: | Central Processor | |
Processor Voltage: | 3.3 V, 2.9 V | |
Processor Upgrade: | ZIF | |
Socket Designation: | Socket-1 |
Internal Cache |
Socket Designation: | Internal Cache | |
Cache State: | Enabled | |
Cache Location: | Internal | |
Cache Type: | L1 Data | |
Cache Scheme: | Write-Back | |
Supported SRAM Type: | Synchronous | |
Current SRAM Type: | Pipeline Burst, Synchronous | |
Cache Speed: | 40 ns | |
Error Correction Type: | Single-bit ECC | |
Maximum Cache Size: | 1024 KBytes | |
Installed Cache Size: | Single-bit ECC | |
Cache Associativity: | 4-way Set-Associative |
Internal Cache |
Socket Designation: | Internal Cache | |
Cache State: | Enabled | |
Cache Location: | Internal | |
Cache Type: | L2 Unified | |
Cache Scheme: | Write-Back | |
Supported SRAM Type: | Synchronous | |
Current SRAM Type: | Synchronous | |
Cache Speed: | 40 ns | |
Error Correction Type: | Parity | |
Maximum Cache Size: | 1024 KBytes | |
Installed Cache Size: | Parity | |
Cache Associativity: | Unknown |
OEM Strings |
SMBIOS Support from AMI | ||
Tested by James |
System Configuration Options |
System Management BIOS from Atlanta | ||
SMBIOS from AMI |
BIOS Language |
English | ||
Traditional Chinese | ||
Simplified Chinese | ||
Japanese |
Memory Devices |
Memory Controller |
Error Detecting Method: | 32-bit ECC | |
Error Correction: | Single-Bit | |
Supported Interleave: | 1-Way | |
Current Interleave: | 1-Way | |
Max. Memory Module Size: | 1024 MBytes | |
Supported Memory Speed: | 70 ns, 60 ns | |
Supported Memory Type: | SPM, FPM, EDO, Parity, ECC, SIMM | |
Supported Memory Voltage: | 3.3 V | |
Associated Memory Slots: | 4 |
DIMM1 |
Socket Designation: | DIMM1 | |
Memory Type: | ||
Memory Speed: | Unknown | |
Installed size: | Not installed | |
Enabled size: | Not installed |
DIMM2 |
Socket Designation: | DIMM2 | |
Memory Type: | DIMM, SDRAM | |
Memory Speed: | Unknown | |
Installed size: | 128 MBytes | |
Enabled size: | 128 MBytes |
DIMM3 |
Socket Designation: | DIMM3 | |
Memory Type: | ||
Memory Speed: | Unknown | |
Installed size: | Not installed | |
Enabled size: | Not installed |
DIMM4 |
Socket Designation: | DIMM4 | |
Memory Type: | ||
Memory Speed: | Unknown | |
Installed size: | Not installed | |
Enabled size: | Not installed |
Port Connectors |
SSA SCSI |
Port Type: | SSA SCSI | |
Internal Reference: | USB | |
Internal Connector Type: | Mini Centronics | |
External Reference: | Def | |
External Connector Type: | DB25 pin male |
Memory |
[General Information] | ||
Total Memory Size: | 128 MBytes | |
Total Memory Size [MB]: | 128 | |
[Current Performance Settings] | ||
Current Memory Clock: | 99.5 MHz (1 : 1 Ratio) | |
Current Timing (tCAS-tRCD-tRP-tRAS): | 3-3-3-6 | |
Memory Channels Active: | 1 | |
Row: 0 - <Empty> |
[General Row Information] | ||
Row Number: | 0 | |
Row Size: | <Empty> |
Row: 1 - <Empty> |
[General Row Information] | ||
Row Number: | 1 | |
Row Size: | <Empty> |
Row: 2 - 128 MB DDR SDRAM |
[General Row Information] | ||
Row Number: | 2 | |
Row Size: | 128 MBytes | |
Memory Type: | DDR SDRAM | |
Error Check/Correction: | None |
Row: 3 - <Empty> |
[General Row Information] | ||
Row Number: | 3 | |
Row Size: | <Empty> |
Row: 4 - <Empty> |
[General Row Information] | ||
Row Number: | 4 | |
Row Size: | <Empty> |
Row: 5 - <Empty> |
[General Row Information] | ||
Row Number: | 5 | |
Row Size: | <Empty> |
Row: 6 - <Empty> |
[General Row Information] | ||
Row Number: | 6 | |
Row Size: | <Empty> |
Row: 7 - <Empty> |
[General Row Information] | ||
Row Number: | 7 | |
Row Size: | <Empty> |
Bus |
PCI Bus #0 |
VIA VT8753(A) P4X266(A) Chipset - System Controller |
[General Information] | ||
Device Name: | VIA VT8753(A) P4X266(A) Chipset - System Controller | |
Original Device Name: | VIA VT8753(A) P4X266(A) Chipset - System Controller | |
Device Class: | Host-to-PCI Bridge | |
Revision ID: | 1 | |
PCI Address (Bus:Device:Function) Number: | 0:0:0 | |
PCI Latency Timer: | 8 | |
Hardware ID: | PCI\VEN_1106&DEV_3128&SUBSYS_00001106&REV_01 | |
[System Resources] | ||
Interrupt Line: | N/A | |
Interrupt Pin: | N/A | |
Memory Base Address 0 | E0000000 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
[Driver Information] | ||
Driver Manufacturer: | (Standard system devices) | |
Driver Description: | PCI standard host CPU bridge | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.5512 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3128&SUBSYS_00000000&REV_01\3&61AAA01&0&00 | |
[V-Link Specification ID] | ||
Specification Revision: | 0 | |
[NB V-Link Capability] | ||
16-bit Bus Width: | Not Supported | |
8-bit Bus Width: | Supported | |
4x Rate: | Supported | |
2x Rate: | Not Supported | |
[NB Downlink Command] | ||
DnCmd Max Request Depth: | 9 cmds | |
DnCmd Write Buffer Size: | 8 DWords | |
[NB Uplink Status] | ||
UpCmd P2C Write Buffer Size: | 8 lines | |
UpCmd P2P Write Buffer Size: | 2 lines | |
UpCmd Max Request Depth: | 9 cmds | |
[NB V-Link Bus Timer] | ||
Timer for Normal Priority Requests from SB: | 4*4 VCLKs | |
Timer for High Priority Requests from SB: | 4*4 VCLKs | |
[NB V-Link Misc Control] | ||
Downstream High Priority: | Disabled | |
Downlink Priority: | Normal | |
Combine Multiple STPGNT Cycles into One VLink Command: | 1:1 (compatible) | |
V-Link Master Access Ordering Rules: | High priority read, pass normal read | |
[V-Link Control] | ||
Auto-Disconnect: | Disabled | |
V-Link Disconnect Cycle for HALT Cycle: | Disabled | |
V-Link Disconnect Cycle for STPGNT Cycle: | Disabled | |
[NB/SB V-Link Configuration] | ||
Reset Bus Width: | Not Supported | |
16-bit Bus Width: | Not Supported | |
8-bit Bus Width: | Supported | |
4x Rate: | Supported | |
2x Rate: | Not Supported | |
[SB V-Link Capability] | ||
16-bit Bus Width: | Not Supported | |
8-bit Bus Width: | Supported | |
4x Rate: | Supported | |
2x Rate: | Not Supported | |
[SB Downlink Status] | ||
DnCmd Max Request Depth: | 9 cmds | |
DnCmd Write Buffer Size: | 8 DWords | |
[SB Uplink Command] | ||
UpCmd P2C Write Buffer Size: | 8 lines | |
UpCmd P2P Write Buffer Size: | 2 lines | |
UpCmd Max Request Depth: | 9 cmds | |
[SB V-Link Bus Timer] | ||
Timer for Normal Priority Requests from NB: | 4*4 VCLKs | |
Timer for High Priority Requests from NB: | 4*4 VCLKs | |
[CCA Master Priority] | ||
1394 Priority: | Low | |
LAN/NIC Priority: | Low | |
USB Priority: | Low | |
IDE Priority: | Low | |
AC97-ISA Priority: | Low | |
PCI Priority: | Low | |
[SB V-Link Misc Control] | ||
Upstream High Priority: | Disabled | |
Down Cycle Wait for Up Cycle Write Flush: | Disabled | |
[Request Phase Control] | ||
CPU Hardwired In Order Queue Size: | 12-Level | |
Fast DRAM Access: | Enabled | |
Dynamic Defer Snoop Stall Count: | 16T | |
[CPU Interface Basic Control] | ||
CPU Read DRAM Fast Ready: | Medium/Slow Ready | |
Read Around Write: | Enabled | |
DRQ Control: | Non pipelined | |
CPU to PCI Read Defer: | Enabled | |
Two Defer / Retry Entries: | Enabled | |
Two Defer / Retry Entries Shared: | Shared by 2 CPUs | |
PCI Master Pipelined Access: | Enabled | |
CPU Read DRAM Medium Ready: | Slow Ready | |
[CPU Interface Advanced Control] | ||
CPU RW DRAM 0WS for Back-to-Back Pipeline Access: | Enabled | |
HREQ High Priority: | Enabled | |
AGTL+ Pullups (VT8753A): | Enabled | |
Dynamic Snoop Stall for CPU FIFO Full: | Disabled | |
Write Retire Policy After 2 Writes: | Enabled | |
Consecutive Speculative Read: | Enabled | |
Speculative Read: | Enabled | |
[CPU Arbitration Control] | ||
Host Timer: | 8 | |
BPRI Timer: | 32 HCLKs | |
[CPU Frequency Select] | ||
CPU FSB Frequency: | 133 MHz | |
Auto Configuration: | Disabled | |
SDRAM Burst Length 8QW: | Disabled | |
Rx85, 86, and 87 Writable (VT8753A): | Enabled | |
PCI Master 8QW Operation: | Enabled | |
AGP Capability Header Support: | Enabled | |
VPX Mode: | Disabled (AGP Mode) | |
[DRAM Control] | ||
0WS Back-to-Back Write to Different DDR Bank: | Enabled | |
DQS Input DLL Adjustment: | Disabled | |
DQS Output DLL Adjustment: | Disabled | |
DQM Removal (Always Perform 4-Burst RW): | Disabled | |
DQS Output: | Enabled | |
Auto Precharge for TLB Read or CPU WriteBack: | Disabled | |
Write Recovery Time: | 2T | |
[Shadow RAM Control 1] | ||
CC000h-CFFFFh: | Read-only | |
C8000h-CBFFFh: | Read-only | |
C4000h-C7FFFh: | Read-only | |
C0000h-C3FFFh: | Read-only | |
[Shadow RAM Control 2] | ||
DC000h-DFFFFh: | No access | |
D8000h-DBFFFh: | No access | |
D4000h-D7FFFh: | No access | |
D0000h-D3FFFh: | R/W | |
[Shadow RAM Control 3] | ||
E0000h-EFFFFh: | Read-only | |
F0000h-FFFFFh: | Read-only | |
Memory Hole: | None | |
A,BK Direct SMRAM Access: | Enabled | |
A,BK DRAM Access: | Disabled | |
[DRAM Timing for All Banks] | ||
Precharge Command to Active Command Period: | Trp = 3T | |
Active Command to Precharge Command Period: | Tras = 6T | |
CAS Latency: | 2.5T (DDR)/3T (SDR) | |
ACTIVE to CMD: | 3T | |
Bank Interleave: | 4-way | |
[DRAM Arbitration Timer] | ||
AGP Timer: | 36 MCLKs | |
CPU Timer: | 36 MCLKs | |
[DRAM Arbitration Control] | ||
Feedback Clock (SDR)/DQS Input Delay (DDR): | Auto | |
DDR - DQS Output Delay: | Auto | |
Arbitration Parking Policy: | Park at last bus owner | |
AGP / CPU Priority: | 0 MCLKs | |
[DDR Strobe Input Delay] | ||
CS Early Clock Select (DDR): | 0 | |
DQS Input Delay (DDR)/MD Latch Clock Select and Clock Delay (SDR): | 32 | |
[DDR Strobe Output Delay] | ||
DQS Output Delay (DDR): | 74 | |
[DRAM Clock Select] | ||
CPU Operating Frequency Faster Than DRAM: | Same As or Equal to DRAM | |
DRAM Operating Frequency Faster Than CPU: | Same Frequency | |
Dynamic CKE/DRAM Ctrlr Queue Greater Than 2 (VT8753A): | Enabled | |
DRAM Ctrlr Queue Not Equal To 4 (VT8753A): | Disabled | |
DRAM 8K Page: | Disabled | |
DRAM 4K Page: | Enabled | |
DIMM Type: | Unbuffered | |
Multiple Page Mode: | Enabled | |
[Refresh Counter] | ||
Refresh Counter: | 800 MCLKs | |
[DRAM Arbitration Control] | ||
Fast Read to Write Turn-around: | Disabled | |
Page Kept Active When Cross Bank: | Enabled | |
Burst Refresh: | Disabled | |
CKE Function: | Enabled | |
HA14/HA22 Swap: | Disabled | |
[DRAM Drive Control 1] | ||
SDRAM A Drive - SRASA/SCASA/SWEA, MAA: | Highest | |
SDRAM B Drive - SRASB/SCASB/SWEB, MAB: | Lowest | |
DDR DQS Drive: | Higher | |
MD/MECC/DQM/CKE Early Clock Select: | Latest | |
[DRAM Drive Control 2] | ||
Early Clock Select for SCMD, MA Output: | Latest | |
DQM Drive: | Lower | |
CS# Drive: | Lower | |
Memory Data Drive: | Highest | |
[ECC Control] | ||
Error Checking Mode: | EC | |
Perform Read-Modify-Write for Partial Write: | Disabled | |
SERR# on ECC Multi-Bit Error: | Disabled | |
SERR# on ECC Single-Bit Error: | Disabled | |
EC/ECC Enable [Bank 7/6]: | Disabled | |
EC/ECC Enable [Bank 5/4]: | Disabled | |
EC/ECC Enable [Bank 3/2]: | Disabled | |
EC/ECC Enable [Bank 1/0]: | Disabled | |
[PCI Buffer Control] | ||
CPU-to-PCI Posted Writes: | Enabled | |
PCI Master to DRAM Prefetch: | Always prefetch | |
Delay Transaction: | Enabled | |
[CPU to PCI Flow Control] | ||
Retry Timeout Action: | Flush buffer | |
Retry Count And Backoff: | 2x, back off CPU | |
PCI Burst: | Enabled | |
Configuration Cycle: | Fix AD31 | |
IDSEL Control: | AD11/AD12 | |
[PCI Master Control] | ||
PCI Master 1 WS Write: | 0 WS TRDY# Resp. | |
PCI Master 1 WS Read: | 0 WS TRDY# Resp. | |
WSC#: | Disabled | |
PCI Master Broken Timer: | Enabled | |
[PCI Arbitration Control 1] | ||
Arbitration Mode: | REQ#-based | |
Latency Timer: | 0 | |
PCI Master Bus Timeout: | 16 PCICLKs | |
[PCI Arbitration Control 2] | ||
I/O Port 22: | Disabled | |
Master Priority Rotation Control: | After 1 PCI master grant | |
REQn# to REQ4# Mapping: | REQ4# | |
REQ4# Master Priority: | Normal | |
[Graphics Aperture Size] | ||
Graphics Aperture Size: | 64M | |
[CPU-to-Memory Write Policy] | ||
Write Request Limit: | 3 | |
Write Request Base: | 0 | |
[CPU-to-Memory Bandwidth Timer (VT8753A)] | ||
Host Bandwidth Timer: | 0 | |
DRAM Bandwidth Timer: | 8 | |
[CPU-to-Memory Bandwidth Limit (VT8753A)] | ||
Bandwidth Limit: | Dynamically toggled | |
CPU Access DRAM Read After Write: | Improved | |
[GA Translation Table Base] | ||
GA Translation Table Base: | 800000 | |
Graphics Aperture Status: | Enabled | |
[AGP Status Register] | ||
Max. AGP Request Queue Depth: | 31 | |
AGP Side Band Addressing: | Supported | |
>4G Support: | Not supported | |
Fast Write: | Not supported | |
Supported AGP Data Transfer: | 1x, 2x and 4x | |
[AGP Command Register] | ||
AGP Sideband Addressing: | Disabled | |
AGP Status: | Enabled | |
>4G Support: | Disabled | |
Fast Write: | Disabled | |
Current AGP Transfer Rate: | 4x | |
[AGP Control] | ||
AGP Status: | Disabled | |
AGP Read Synchronization: | Disabled | |
AGP Read Snoop DRAM Post-Write Buffer: | Enabled | |
GREQ# Priority Becomes Higher When Arbiter is Parked at AGP Master: | Disabled | |
2X Rate Supported: | Supported | |
LPR In-Order Access: | Enabled | |
AGP Arbitration Parking: | Enabled | |
AGP to PCI Master or CPU to PCI Turnaround Cycle: | 1T | |
[AGP Latency Timer] | ||
Input on AGP GD/GBE Pads: | Disabled | |
Choose First or Last Ready of DRAM: | First ready chosen | |
AGP Data Phase Latency Timer: | 2 | |
[AGP Miscellaneous Control] | ||
>4G Support: | Not supported | |
Fast Write: | Not supported | |
4x Rate Support: | Not supported | |
[AGP Pad Control] | ||
AGP 4x Strobe VREF Control: | STB VREF <=> STB# | |
AGP 4x Strobe & GD Pad Drive Strength: | Controlled by strenght reg | |
AGP Compensation Circuit N Control Output: | 7 | |
AGP Compensation Circuit P Control Output: | 0 | |
[AGP Drive Strength] | ||
AGP Output Buffer Drive Strength N Control: | 9 | |
AGP Output Buffer Drive Strength P Control: | 11 | |
[AGP Pad Drive / Delay Control] | ||
GD/GDS/GDS#/GBEPa d Control: | SA/SBS Delayed (3.3V), else Normal | |
GD[31-16] Staggered Delay: | 1 ns | |
GD, GDS, GDS# Slew Rate: | Disabled | |
GD, GDS, GDS# Preamble Control: | Disabled | |
AGP Voltage: | 1.5V | |
GDS Output Delay: | None | |
[AGP Stobe Drive Strength] | ||
AGP Stobe Output Drive Strength N Control: | 9 | |
AGP Stobe Output Drive Strength P Control: | 11 | |
[V-Link NB Compensation Control] | ||
V-Link Autocompensation Output Value: | 2 | |
Pullup Compensation Selection: | Auto | |
Pulldown Compensation Selection: | Auto | |
Pullup Compensation Manual Setting: | 0 | |
Pulldown Compensation Manual Setting: | 0 | |
[V-Link NB Drive Control] | ||
Strobe Pullup Manual Setting: | 0 | |
Strobe Pulldown Manual Setting: | 0 | |
V-Link Slew Rate Control: | Disabled | |
[V-Link SB Compensation Control] | ||
V-Link Autocompensation Output Value: | 2 | |
Pullup Compensation Selection: | Auto | |
Pulldown Compensation Selection: | Auto | |
Pullup Compensation Manual Setting: | 0 | |
Pulldown Compensation Manual Setting: | 0 | |
[V-Link SB Drive Control] | ||
Strobe Pullup Manual Setting: | 0 | |
Strobe Pulldown Manual Setting: | 0 | |
V-Link Slew Rate Control: | Disabled | |
[MECC Drive Strength] | ||
MECC Drive Strength: | 0 | |
[DRAM Pad Toggle Reduction] | ||
MA / SCMD Pin Toggle Reduction: | Disabled | |
Slew Rate Control for MA / SCMD Group A: | Disabled | |
Slew Rate Control for MA / SCMD Group B: | Disabled | |
DIMM #3 MAA / MAB Select: | MAA | |
DIMM #2 MAA / MAB Select: | MAA | |
DIMM #1 MAA / MAB Select: | MAA | |
DIMM #0 MAA / MAB Select: | MAA | |
[Host Address (2x) Pullup Drive] | ||
Strobe Pullup Drive (HAS#): | 3 | |
Address Pullup Drive (HA,HREQ#): | 3 | |
[Host Address (2x) Pulldown Drive] | ||
Strobe Pulldown Drive (HAS#): | 3 | |
Address Pulldown Drive (HA,HREQ#): | 3 | |
[Host Data (4x) Pullup Drive] | ||
Strobe Pullup Drive (HDS,HDS#): | 3 | |
Address Pullup Drive (HD,HDBI#): | 3 | |
[Host Data (4x) Pulldown Drive] | ||
Strobe Pulldown Drive (HDS,HDS#): | 3 | |
Address Pulldown Drive (HD,HDBI#): | 3 | |
[Output Delay / Stagger Control] | ||
Data / Strobe Relative Delay: | Data delay = strobe delay | |
HD[63:48, 31:16], HDBI[3,1]# Output Stagger: | Delay 1 ns | |
HDS / HDS# Output Extra Delay: | 300 psec | |
HAS# Output Extra Delay: | None | |
[AGTL+ I/O Control] | ||
AGTL+ 4x Input Increase Delay to Filter Noise: | Disabled | |
AGTL+ 2x Input Increase Delay to Filter Noise: | Disabled | |
AGTL+ Slew Rate Control: | Enabled | |
Input Pullup: | Enabled | |
AGTL+ Strobe Internal Termination Pullups: | Disabled | |
AGTL+ Data Internal Termination Pullups: | Disabled | |
AGTL+ Dynamic Compensation: | Disabled | |
[AGTL+ Comp Status] | ||
Select AutoCompensation Drive: | Disabled | |
AGTL+ Compensation Result: | 5 | |
AGTL+ POS Function: | Inputs always powered | |
DBI Double Check: | Disabled | |
DBI (Dynamic Bus Inversion) Function: | Disabled | |
[AGTL+ Auto Comp Offset] | ||
AGTL+ Drive Offset to Comp Result for 2x Pad: | 0 | |
AGTL+ Drive Offset to Comp Result for 4x Pad: | 0 | |
[CPU Direct Access Frame Buffer Base] | ||
CPU Direct Access Frame Buffer Base Address [27:21]: | 0 | |
CPU Direct Access Frame Buffer Status: | Disabled | |
[CPU Direct Access FB Size] | ||
Internal VGA: | Disabled | |
Frame Buffer Size: | None | |
CPU Direct Access Frame Buffer Base Address [31:28]: | 0 | |
[VGA Arbitration Timer 1] | ||
VGA High Priority Timer: | 0 MCLKs | |
VGA Timer: | 0 MCLKs | |
[VGA Arbitration Timer 2] | ||
Timer to Promote Graphics Timer: | 0 MCLKs | |
Probing Signal Select: | 0 | |
[Low Top Address Low] | ||
Low Top Address Low: | 0 | |
DRAM Granularity: | 16M: Total DRAM-4G | |
[Low Top Address High] | ||
Low Top Address High: | 0 | |
[SMM / APIC Decoding] | ||
I/O APIC Decoding: | FECxxxxx->PCI | |
MSI (Processor Message) Support: | Disabled | |
Top SMM: | Disabled | |
High SMM: | Disabled | |
Compatible SMM: | Enabled |
VIA VT8633 A.G.P. Controller |
[General Information] | ||
Device Name: | VIA VT8633 A.G.P. Controller | |
Original Device Name: | VIA VT8633 A.G.P. Controller | |
Device Class: | PCI-to-PCI Bridge | |
Revision ID: | 0 | |
PCI Address (Bus:Device:Function) Number: | 0:1:0 | |
PCI Latency Timer: | 0 | |
Hardware ID: | PCI\VEN_1106&DEV_B091&SUBSYS_00000000&REV_00 | |
[System Resources] | ||
Interrupt Line: | N/A | |
Interrupt Pin: | N/A | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
[Driver Information] | ||
Driver Manufacturer: | VIA | |
Driver Description: | VIA CPU to AGP Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.5512 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_B091&SUBSYS_00000000&REV_00\3&61AAA01&0&08 |
AGP 4x Bus (PCI Bus #1) |
NVIDIA MAP17-232 [Twinhead] |
[General Information] | ||
Device Name: | NVIDIA MAP17-232 [Twinhead] | |
Original Device Name: | NVIDIA GeForce4 420 Go 32M | |
Device Class: | VGA Compatible Adapter | |
Revision ID: | A3 | |
PCI Address (Bus:Device:Function) Number: | 1:0:0 | |
PCI Latency Timer: | 248 | |
Hardware ID: | PCI\VEN_10DE&DEV_0176&SUBSYS_030B14FF&REV_A3 | |
[System Resources] | ||
Interrupt Line: | IRQ11 | |
Interrupt Pin: | INTA# | |
Memory Base Address 0 | DE000000 | |
Memory Base Address 1 | D8000000 | |
Memory Base Address 2 | DDC80000 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Capable | |
Fast Back-to-Back Transactions: | Capable | |
[Driver Information] | ||
Driver Manufacturer: | NVIDIA | |
Driver Description: | NVIDIA MAP17-232 | |
Driver Provider: | NVIDIA | |
Driver Version: | 6.14.10.9420 (ForceWare 94.20) | |
Driver Date: | 30-Nov-2006 | |
DCH/UWD Driver: | Not Capable | |
DeviceInstanceId | PCI\VEN_10DE&DEV_0176&SUBSYS_030B14FF&REV_A3\4&26E5833C&0&0008 |
Texas Instruments PCI-1410 CardBus Controller |
[General Information] | ||
Device Name: | Texas Instruments PCI-1410 CardBus Controller | |
Original Device Name: | Texas Instruments PCI-1410 CardBus Controller | |
Device Class: | CardBus Bridge | |
Revision ID: | 2 | |
PCI Address (Bus:Device:Function) Number: | 0:3:0 | |
PCI Latency Timer: | 0 | |
Hardware ID: | PCI\VEN_104C&DEV_AC50&SUBSYS_0000FE00&REV_02 | |
[System Resources] | ||
Interrupt Line: | IRQ10 | |
Interrupt Pin: | INTA# | |
Memory Base Address 0 | FFDFE000 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
[Driver Information] | ||
Driver Manufacturer: | Texas Instruments | |
Driver Description: | Texas Instruments PCI-1410 CardBus Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.0 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_104C&DEV_AC50&SUBSYS_060314FF&REV_02\3&61AAA01&0&18 |
PCI Bus #129 |
VIA VT6202 PCI-to-USB Controller |
[General Information] | ||
Device Name: | VIA VT6202 PCI-to-USB Controller | |
Original Device Name: | VIA VT6202 PCI-to-USB Controller | |
Device Class: | USB UHCI Controller | |
Revision ID: | 50 | |
PCI Address (Bus:Device:Function) Number: | 0:7:0 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_3038&SUBSYS_C90214FF&REV_50 | |
[System Resources] | ||
Interrupt Line: | IRQ5 | |
Interrupt Pin: | INTA# | |
I/O Base Address 4 | E800 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
USB Version Supported: | 1.0 | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies | |
Driver Description: | VIA Rev 5 or later USB Universal Host Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.5512 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3038&SUBSYS_C90214FF&REV_50\3&61AAA01&0&38 | |
[Miscellaneous Control 1] | ||
PCI Memory Commands Support: | MRL, MRM, and MWAI | |
Babbled Port of EOF: | Disabled | |
PCI Parity Checking: | Disabled PERR# | |
Frame Interval Select: | 1 msec | |
USB Data Length Limit: | 1280 bytes | |
USB Power Management/Improved FIFO Latency: | Disabled | |
DMA Limited To: | 16-DW Burst | |
PCI Wait States: | 0 WS | |
[Miscellaneous Control 2] | ||
USB 1.1 Improvement for EOP: | Disabled (USB 1.0) | |
Trap Status Bits Override: | Disabled | |
A20GATE Pass Through Option: | Pass | |
[Miscellaneous Control 4] | ||
Continue Transmission of Erroneous Data on FIFO Underrun: | Enabled | |
Issue CRC Error Instead of Stuffing Error on FIFO Underrun: | Enabled | |
[Miscellaneous Control 5] | ||
Issue Bad CRC5 in SOF After FIFO Underrun: | Enabled | |
Lengthen PreSOF Time: | Enabled | |
Issue Nonzero Bad CRC Code on FIFO Underrun: | Non zero CRC | |
[Miscellaneous Control 6] | ||
EHCI Supports PME Assertion in D3 Cold State: | Supported | |
UHCI Supports PME Assertion in D3 Cold State: | Supported | |
[Miscellaneous Control 7] | ||
Use External 60 MHz Clock: | Disabled | |
[USB Release Number] | ||
USB Release Number: | 1.0 | |
[USB Legacy Support] | ||
UHCI v1.1 Compliant: | 2000 |
USB Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA VT6202 PCI-to-USB Controller |
[General Information] | ||
Device Name: | VIA VT6202 PCI-to-USB Controller | |
Original Device Name: | VIA VT6202 PCI-to-USB Controller | |
Device Class: | USB UHCI Controller | |
Revision ID: | 50 | |
PCI Address (Bus:Device:Function) Number: | 0:7:1 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_3038&SUBSYS_C90214FF&REV_50 | |
[System Resources] | ||
Interrupt Line: | IRQ5 | |
Interrupt Pin: | INTB# | |
I/O Base Address 4 | EC00 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
USB Version Supported: | 1.0 | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies | |
Driver Description: | VIA Rev 5 or later USB Universal Host Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.5512 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3038&SUBSYS_C90214FF&REV_50\3&61AAA01&0&39 | |
[Miscellaneous Control 1] | ||
PCI Memory Commands Support: | MRL, MRM, and MWAI | |
Babbled Port of EOF: | Disabled | |
PCI Parity Checking: | Disabled PERR# | |
Frame Interval Select: | 1 msec | |
USB Data Length Limit: | 1280 bytes | |
USB Power Management/Improved FIFO Latency: | Disabled | |
DMA Limited To: | 16-DW Burst | |
PCI Wait States: | 0 WS | |
[Miscellaneous Control 2] | ||
USB 1.1 Improvement for EOP: | Disabled (USB 1.0) | |
Trap Status Bits Override: | Disabled | |
A20GATE Pass Through Option: | Pass | |
[Miscellaneous Control 4] | ||
Continue Transmission of Erroneous Data on FIFO Underrun: | Enabled | |
Issue CRC Error Instead of Stuffing Error on FIFO Underrun: | Enabled | |
[Miscellaneous Control 5] | ||
Issue Bad CRC5 in SOF After FIFO Underrun: | Enabled | |
Lengthen PreSOF Time: | Enabled | |
Issue Nonzero Bad CRC Code on FIFO Underrun: | Non zero CRC | |
[Miscellaneous Control 6] | ||
EHCI Supports PME Assertion in D3 Cold State: | Supported | |
UHCI Supports PME Assertion in D3 Cold State: | Supported | |
[Miscellaneous Control 7] | ||
Use External 60 MHz Clock: | Disabled | |
[USB Release Number] | ||
USB Release Number: | 1.0 | |
[USB Legacy Support] | ||
UHCI v1.1 Compliant: | 2000 |
USB Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA VT6202 USB 2.0 Enhanced Host Controller |
[General Information] | ||
Device Name: | VIA VT6202 USB 2.0 Enhanced Host Controller | |
Original Device Name: | VIA VT6202 USB 2.0 Enhanced Host Controller | |
Device Class: | USB EHCI Controller | |
Revision ID: | 51 | |
PCI Address (Bus:Device:Function) Number: | 0:7:2 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_3104&SUBSYS_C90214FF&REV_51 | |
[System Resources] | ||
Interrupt Line: | IRQ5 | |
Interrupt Pin: | INTC# | |
Memory Base Address 0 | DFFFFF00 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
USB Version Supported: | 2.0 | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies, Inc. | |
Driver Description: | VIA USB 2.0 Enhanced Host Controller | |
Driver Provider: | VIA Technologies, Inc. | |
Driver Version: | 5.1.2600.1106 | |
Driver Date: | 09-Sep-2002 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3104&SUBSYS_C90214FF&REV_51\3&61AAA01&0&3A | |
[Miscellaneous Control 1] | ||
Babbled Port of EOF: | Enabled | |
PCI Parity Checking: | Disabled PERR# | |
DMA Limited To: | 16-DW Burst | |
[Miscellaneous Control 5] | ||
CCA Burst Access: | Enabled | |
[Miscellaneous Control 6] | ||
Clock Auto Stop: | Disabled | |
Auto Power Down Receiver Squelch Detector: | Auto Power Down | |
[USB Release Number] | ||
USB Release Number: | 2.0 | |
[Frame Length Adjust] | ||
Frame Length Adjust: | 32 |
USB Root Hub |
[Port1] : SanDisk Ultra Flair |
[Device Information] | ||
Device Manufacturer: | SanDisk | |
Product Name: | Ultra USB 3.0 | |
Serial Number: | 0101a5827dc5b1f19875e9d2538d44674aa2d7bcbb805a3a848eda8ab83815c28a9600000000000000000000284600bcff99210091558107b5a6ddd8 | |
USB Version Supported: | 3.00 (Connected to a USB 2.00 Port) | |
USB Device Speed: | USB 2.0 High-speed | |
Driver Description: | USB Mass Storage Device | |
Hardware ID: | USB\VID_0781&PID_5591 | |
[Driver Information] | ||
Driver Manufacturer: | Compatible USB storage device | |
Driver Description: | USB Mass Storage Device | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.0 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | USB\VID_0781&PID_5591\0101A5827DC5B1F19875E9D2538D44674AA2D7BCBB805A3A848EDA8AB83815C28A9600000000000000000000284600BCFF99210091558107B5A6DDD8 |
[Port2] : No Device Connected |
[Port3] : No Device Connected |
[Port4] : No Device Connected |
VIA VT6306 Fire II IEEE 1394 Host Controller |
[General Information] | ||
Device Name: | VIA VT6306 Fire II IEEE 1394 Host Controller | |
Original Device Name: | VIA VT6306 Fire II IEEE 1394 Host Controller | |
Device Class: | Firewire (IEEE 1394) Serial Bus | |
Revision ID: | 46 | |
PCI Address (Bus:Device:Function) Number: | 0:10:0 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_3044&SUBSYS_02C7FF14&REV_46 | |
[System Resources] | ||
Interrupt Line: | IRQ10 | |
Interrupt Pin: | INTA# | |
Memory Base Address 0 | DFFFF000 | |
I/O Base Address 1 | E400 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
[Driver Information] | ||
Driver Manufacturer: | VIA | |
Driver Description: | VIA OHCI Compliant IEEE 1394 Host Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2535.0 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3044&SUBSYS_02C7FF14&REV_46\3&61AAA01&0&50 |
VIA VT8233 PCI-to-ISA Bridge |
[General Information] | ||
Device Name: | VIA VT8233 PCI-to-ISA Bridge | |
Original Device Name: | VIA VT8233 PCI-to-ISA Bridge | |
Device Class: | PCI-to-ISA Bridge | |
Revision ID: | 0 | |
PCI Address (Bus:Device:Function) Number: | 0:17:0 | |
PCI Latency Timer: | 0 | |
Hardware ID: | PCI\VEN_1106&DEV_3074&SUBSYS_00001106&REV_00 | |
[System Resources] | ||
Interrupt Line: | N/A | |
Interrupt Pin: | N/A | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
DeviceInstanceId | PCI\VEN_1106&DEV_3074&SUBSYS_00000000&REV_00\3&61AAA01&0&88 | |
[ISA Bus Control] | ||
ISA Command Delay: | Normal | |
I/O Recovery Time: | Enabled | |
ROM Wait States: | 1 WS | |
ROM Write: | Disabled | |
Double DMA Clock: | 4 MHz | |
4D0/4D1 Port Configuration: | Enabled | |
DMA/Interrupt/Timer Shadow Register Read: | Disabled | |
Double ISA Bus Clock: | PCLK/4 = 8 MHz | |
[BIOS ROM Decode Control] | ||
FFF00000h-FFF7FFFFh: | Disabled | |
FFE80000h-FFEFFFFFh: | Disabled | |
FFE00000h-FFE7FFFFh: | Disabled | |
FFD80000h-FFDFFFFFh: | Disabled | |
FFD00000h-FFD7FFFFh: | Disabled | |
FFC80000h-FFCFFFFFh: | Disabled | |
FFC00000h-FFC7FFFFh: | Disabled | |
[Line Buffer Control] | ||
ISA Master DMA Line Buffer: | Enabled | |
Gate Interrupt Until Line Buffer Flush Complete: | Enabled | |
Flush Line Buffer for Interrupt: | Enabled | |
Uninterruptable Burst Read: | Enabled | |
DMA Into Line Buffer: | Disabled | |
[Delay Transaction Control] | ||
Delayed Transactions (PCI 2.1): | Disabled | |
Only Posted Write: | Disabled | |
Write Delay Transaction Timeout Timer: | Disabled | |
Read Delay Transaction Timeout Timer: | Disabled | |
[CCA Control 1] | ||
NIC Master / Slave Cycle Concurrent: | Disabled | |
USB Master / Slave Cycle Concurrent: | Disabled | |
IDE Master / Slave Cycle Concurrent: | Disabled | |
AC97 Master / Slave Cycle Concurrent: | Disabled | |
[CCA Control 2] | ||
SoundBlaster Internal Master Devices Priority Higher Than External PCI Master: | Disabled | |
CCA Clean to Mask Off IRQ: | Enabled | |
PCIM Address Stepping: | Disabled | |
PCIM Wait State: | Disabled | |
WSC Mask Off INTR: | Disabled | |
PCI1: | Disabled | |
CCA: | Disabled | |
[IDE Interrupt Routing] | ||
I/O Recovery Time: | 2 BCLKs | |
Secondary IDE Channel IRQ Routing: | IRQ15 | |
Primary IDE Channel IRQ Routing: | IRQ14 | |
[External APIC IRQ Output Control] | ||
USB Port 4-5 IRQ to APIC[23:16] with Function 4 Rx3C[2:0]: | Disabled | |
LAN IRQ to APIC[23:16] with D0/F0/Rx3C[: | Disabled | |
ACPI IRQ to APIC[23:16] with F6/Rx42[2:0]: | Disabled | |
MC'97 IRQ to APIC[23:16] with F6/Rx3C[2:0]: | Disabled | |
AC'97 IRQ to APIC[23:16] with F5/Rx3C[2:0]: | Disabled | |
USB Port 2-3 IRQ to APIC[23:16] with F3/Rx3C[2:0]: | Disabled | |
USB Port 0-1 IRQ to APIC[23:16] with F2/Rx3C[2:0]: | Disabled | |
[Internal RTC Test Mode] | ||
Extra RTC Port 74/75: | Enabled | |
RTC Reset: | Disabled | |
RTC SRAM Access: | Disabled | |
RTC Test Mode: | Disabled | |
[PCI Bus and CPU Interface Control] | ||
CPU Reset Source: | INIT | |
Config Command Reg Rx04 Access: | Normal | |
IRDY# Wait States: | 0 WS | |
[Function Control 1] | ||
MC'97 Controller: | Enabled | |
AC'97 Controller: | Enabled | |
USB 1.1 UHCI Ports 2-3: | Enabled | |
USB 1.1 UHCI Ports 0-1: | Enabled | |
IDE Controller: | Enabled | |
USB 1.1 UHCI Ports 4-5: | Disabled | |
Internal Audio: | Enabled | |
[Function Control 2] | ||
Internal LAN Controller Clock Gating: | Disabled | |
Internal LAN Controller: | Enabled | |
Internal RTC: | Enabled | |
Internal PS/2 Mouse: | Disabled | |
Internal KBC Configuration: | Disabled | |
Internal KBC: | Disabled | |
[Serial IRQ & LPC Control] | ||
LPC Short Wait Abort: | Disabled | |
LPC Frame Wait State Time: | 1 T | |
LPC Stop to Start Frame Wait State: | Enabled | |
Serial IRQ: | Enabled | |
Serial IRQ Mode: | Continuous | |
Serial IRQ Start-Frame Width: | 6 PCICLKs | |
[PC/PCI DMA Control] | ||
PCI DMA Pair A: | Disabled | |
PCI DMA Channel 7: | Disabled | |
PCI DMA Channel 6: | Disabled | |
PCI DMA Channel 5: | Disabled | |
PCI DMA Channel 3: | Disabled | |
PCI DMA Channel 2: | Disabled | |
PCI DMA Channel 1: | Disabled | |
PCI DMA Channel 0: | Disabled | |
[PCI Interrupt Polarity] | ||
PCI INTA#: | Level-sensitive | |
PCI INTB#: | Level-sensitive | |
PCI INTC#: | Level-sensitive | |
PCI INTD#: | Level-sensitive | |
[PCI PNP Interrupt Routing 1] | ||
PCI INTA# Routing: | IRQ10 | |
[PCI PNP Interrupt Routing 2] | ||
PCI INTC# Routing: | IRQ10 | |
PCI INTB# Routing: | IRQ11 | |
[PCI PNP Interrupt Routing 3] | ||
PCI INTD# Routing: | IRQ5 | |
[Miscellaneous Control 0] | ||
Internal APIC: | Disabled | |
Address Decode: | Subtractive | |
RTC High Bank Access: | Disabled | |
RTC Rx32 Write Protect: | Disabled | |
RTC Rx0D Write Protect: | Enabled | |
RTC Rx32 Map to Century Byte: | Enabled | |
[Miscellaneous Control 1] | ||
APIC Specification 1.4 Compatible: | Disabled | |
LPC Keyboard: | Enabled | |
External MCCS to LPC: | Enabled | |
Internal MCCS: | Enabled | |
A20M# Active: | Disabled | |
P3C I/O Recovery Time: | Disabled | |
[PCS Control] | ||
PCS 0 I/O Port Address: | 0 | |
PCS 1 I/O Port Address: | 804 | |
PCS 2 I/O Port Address: | 0 | |
PCS 3 I/O Port Address: | 0 | |
[PCS I/O Port Address Mask] | ||
PCS 3 I/O Port Address Mask (Range): | 1 Byte | |
PCS 2 I/O Port Address Mask (Range): | 1 Byte | |
PCS 1 I/O Port Address Mask (Range): | 2 Bytes | |
PCS 0 I/O Port Address Mask (Range): | 1 Byte | |
[PCS Control] | ||
PCS 3 Internal I/O: | Disabled | |
PCS 2 Internal I/O: | Disabled | |
PCS 1 Internal I/O: | Disabled | |
PCS 0 Internal I/O: | Disabled | |
PCS 3: | Disabled | |
PCS 2: | Disabled | |
PCS 1: | Enabled | |
PCS 0: | Disabled | |
[Output Control] | ||
FERR Voltage: | 1.5 V | |
[ISA Positive Decoding Control 1] | ||
On-Board I/O Port Positive Decoding: | Disabled | |
MSS I/O Port Positive Decoding: | Disabled | |
MSS I/O Decode Range: | 0530h-0537h | |
Internal APIC Positive Decoding: | Disabled | |
BIOS ROM Positive Decoding: | Disabled | |
Internal PCS1# Positive Decoding: | Disabled | |
Internal PCS0# Positive Decoding: | Disabled | |
[ISA Positive Decoding Control 2] | ||
FDC Positive Decoding: | Disabled | |
LPT Positive Decoding: | Disabled | |
LPT Decode Range: | 3BCh-3BFh, 7BCh-7BEh | |
Game Port Positive Decoding: | Disabled | |
MIDI Positive Decoding: | Disabled | |
MIDI Decode Range: | 300h-303h | |
[ISA Positive Decoding Control 3] | ||
COM Port B Positive Decoding: | Disabled | |
COM Port B Decode Range: | 3F8h-3FFh | |
COM Port A Positive Decoding: | Disabled | |
COM Port A Decode Range: | 3F8h-3FFh | |
[ISA Positive Decoding Control 4] | ||
FIR Positive Decoding: | Disabled | |
FDC Decoding Range: | Primary | |
Sound Blaster Positive Decoding: | Disabled | |
Sound Blaster Decode Range: | 220h-233h | |
[I/O Pad Control] | ||
IDE Interface Output Drive Strength: | 2 | |
PLL PCLK Input Delay Select: | 0 | |
PLL CLK66 Feedback Delay Select: | 0 | |
[General Configuration 0] | ||
Thermal Alarm Source Select: | GPI5 / PME# pin | |
Sleep Button: | Disabled | |
Debounce LID and PWRBTN# Inputs for 200us: | Enabled | |
Microsoft Sound Monitor in Audio Access: | Disabled | |
Game Port Monitor in Audio Access: | Disabled | |
Sound Blaster Monitor in Audio Access: | Disabled | |
MIDI Monitor in Audio Access: | Disabled | |
[General Configuration 1] | ||
I/O Enable for ACPI I/O Base: | Enabled | |
ACPI Timer Count Select: | 24-bit | |
RTC Enable Signal Gated with PSON (SUSC#) in Soft-Off Mode: | Enabled | |
Clock Throttling Clock Select (STPCLK#): | 30 (480) usec | |
[ACPI Interrupt Select] | ||
ATX / AT Power Indicator: | ATX | |
SUSC# State: | 1 | |
SUSC# AC-Power-On Default Value: | 0 | |
SCI Interrupt Assignment: | IRQ9 | |
[Primary Interrupt Channel] | ||
IRQ15 As Pri. Int. Channel: | Disabled | |
IRQ14 As Pri. Int. Channel: | Disabled | |
IRQ13 As Pri. Int. Channel: | Disabled | |
IRQ12 As Pri. Int. Channel: | Enabled | |
IRQ11 As Pri. Int. Channel: | Disabled | |
IRQ10 As Pri. Int. Channel: | Disabled | |
IRQ9 As Pri. Int. Channel: | Disabled | |
IRQ8 As Pri. Int. Channel: | Disabled | |
IRQ7 As Pri. Int. Channel: | Disabled | |
IRQ6 As Pri. Int. Channel: | Disabled | |
IRQ5 As Pri. Int. Channel: | Disabled | |
IRQ4 As Pri. Int. Channel: | Disabled | |
IRQ3 As Pri. Int. Channel: | Disabled | |
IRQ1 As Pri. Int. Channel: | Enabled | |
IRQ0 As Pri. Int. Channel: | Disabled | |
[Secondary Interrupt Channel] | ||
IRQ15 As Sec. Int. Channel: | Disabled | |
IRQ14 As Sec. Int. Channel: | Disabled | |
IRQ13 As Sec. Int. Channel: | Disabled | |
IRQ12 As Sec. Int. Channel: | Disabled | |
IRQ11 As Sec. Int. Channel: | Disabled | |
IRQ10 As Sec. Int. Channel: | Disabled | |
IRQ9 As Sec. Int. Channel: | Disabled | |
IRQ8 As Sec. Int. Channel: | Disabled | |
IRQ7 As Sec. Int. Channel: | Disabled | |
IRQ6 As Sec. Int. Channel: | Disabled | |
IRQ5 As Sec. Int. Channel: | Disabled | |
IRQ4 As Sec. Int. Channel: | Disabled | |
IRQ3 As Sec. Int. Channel: | Disabled | |
IRQ1 As Sec. Int. Channel: | Disabled | |
IRQ0 As Sec. Int. Channel: | Disabled | |
[Power Management I/O Base] | ||
PM I/O Register Base Address: | 800 | |
[Host Bus Power Management Control] | ||
Thermal Duty Cycle: | ||
THRM: | Disabled | |
Frame Input as Resume Event in C3: | Disabled | |
CPU Stop Grant Cycle Select: | Stop Grant Cycle | |
[Throttle / Clock Stop Control] | ||
Throttle Timer: | 4-Bit | |
Fast Clock (7.5us) as Throttle Timer Tick: | Enabled | |
SMI Level Output (Low): | Enabled | |
Internal Clock Stop for PCI Idle: | Disabled | |
Internal Clock Stop During C3: | Disabled | |
Internal Clock Stop During Suspend: | Disabled | |
[GP Timer Control] | ||
Conserve Mode Timer Count Value: | 1/16 sec | |
System In Power-Conservation Mode: | No | |
Power-Conservation Mode: | Disabled | |
Secondary Event Timer Count Value: | 2 ms | |
Secondary Event: | Not occurred | |
Secondary Event Timer: | Disabled | |
GP1 Timer Count: | 207 | |
GP0 Timer Count: | 196 | |
GP1 Timer: | Not Started | |
GP1 Timer Automatic Reload: | Disabled | |
GP1 Timer Base: | Disabled | |
GP0 Timer: | Not Started | |
GP0 Timer Automatic Reload: | Disabled | |
GP0 Timer Base: | Disabled | |
[Power Well Control] | ||
SMBus Clock Select: | From RTC 32.768 kHz | |
STR Power Well Output Gating: | Disabled | |
SUSC# = 0 for STR: | Enabled | |
SUSST1# / GPO3 Select: | GPO3 | |
GPO2 / SUSB# Select: | SUSB# | |
GPO1 / SUSA# Select: | SUSA# | |
GPO0 Output Select: | Fixed Output Level | |
[Miscellaneous Power Well Control] | ||
PME# Level / Edge Select: | Level | |
SUSST# Deasserted Before PWRGD for STD: | Enabled | |
Keyboard / Mouse Port Swap: | Disabled | |
SMB2 / GPO Select: | SMBDT2 / SMBCK2 | |
AOL 2 SMB Slave: | Disabled | |
SUSCLK / GPO4 Select: | SUSCLK | |
USB Wakeup for STR / STD / SoftOff: | Enabled | |
[Power On / Reset Control] | ||
Power On / Reset via AOL2 SMBus GPIO: | Disabled | |
CPU Frequency Strapping Value Output to NMI, INTR, IGNNE#, and A20M# during RESET#: | 0 | |
[GP2/GP3 Timer Control] | ||
GP3 Timer: | Not Started | |
GP3 Timer Automatic Reload: | Disabled | |
GP3 Timer Tick Select: | 1/16 sec | |
GP2 Timer: | Not Started | |
GP2 Timer Automatic Reload: | Disabled | |
GP2 Timer Tick Select: | Disabled | |
[GP2 Timer] | ||
GP2 Timer Current Count: | 253 | |
[GP3 Timer] | ||
GP3 Timer Current Count: | 0 | |
[SMBus I/O Base] | ||
SMBus I/O Base Address: | 400 | |
[SMBus Host Configuration] | ||
SMBus Interrupt Type: | SMI | |
Clock From 64K Source: | Disabled | |
SMBus Interrupt: | Disabled | |
SMBus Host Controller: | Enabled | |
[SMBus Slave Address for Port 1] | ||
SMBus Slave Address for Port 1: | 0 | |
R/W for Shadow Port 1: | Disabled | |
[SMBus Slave Address for Port 2] | ||
SMBus Slave Address for Port 2: | 0 | |
R/W for Shadow Port 2: | Disabled | |
[SMBus Revision ID] | ||
SMBus Revision ID: | 0 | |
[GPI Inversion Control] | ||
GPI27 Input: | Non-inverted | |
GPI26 Input: | Non-inverted | |
GPI25 Input: | Non-inverted | |
GPI24 Input: | Non-inverted | |
GPI19 Input: | Non-inverted | |
GPI18 Input: | Non-inverted | |
GPI17 Input: | Non-inverted | |
GPI16 Input: | Non-inverted | |
[GPI SCI/SMI Select] | ||
GPI27 Interrupt: | SCI | |
GPI26 Interrupt: | SCI | |
GPI25 Interrupt: | SCI | |
GPI24 Interrupt: | SCI | |
GPI19 Interrupt: | SCI | |
GPI18 Interrupt: | SCI | |
GPI17 Interrupt: | SCI | |
GPI16 Interrupt: | SCI | |
[GPO Pin Select] | ||
GPO22-23 / IOR#, IOW# Select: | GPO22 / GPO23 | |
ACSDIN2,3 / GPIO20,21 Select: | GPIO20 / GPIO21 | |
SA[19:16] / GPO[19:16] Select: | SA[19:16] | |
SLP# / GPO7 Select: | SLP# | |
PCISTP#/GPO6 Select: | PCISTP# | |
CPUSTP#/GPO5 Select: | CPUSTP# | |
[GPIO I/O Select 1] | ||
PCS1# on ACSDIN3: | ACSDIN3/GPIO21/SLPBTN# | |
PCS0# on ACSDIN2: | ACSDIN2/GPIO20 | |
IORDY/GPI19 Select: | GPI19 | |
[GPIO I/O Select 2] | ||
GPI31/GPO31 (GPIOE) Select: | GPI31 | |
GPI30/GPO30 (GPIOD) Select: | GPI30 | |
GPI25/GPO25 (GPIOC) Select: | GPI25 | |
GPI24/GPO24 (GPIOA) Select: | GPI24 | |
[GPO Output Type] | ||
GPO31 Output Type: | OD | |
GPO30 Output Type: | OD | |
GPO25 Output Type: | OD | |
GPO24 Output Type: | OD |
VIA VT82C571 Integrated IDE Controller |
[General Information] | ||
Device Name: | VIA VT82C571 Integrated IDE Controller | |
Original Device Name: | VIA VT82C571 Integrated IDE Controller | |
Device Class: | IDE Controller | |
Revision ID: | 6 | |
PCI Address (Bus:Device:Function) Number: | 0:17:1 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_0571&SUBSYS_120314FF&REV_06 | |
[System Resources] | ||
Interrupt Line: | N/A | |
Interrupt Pin: | INTA# | |
I/O Base Address 4 | FC00 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Capable | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies, Inc. | |
Driver Description: | VIA Bus Master IDE Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.5512 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_0571&SUBSYS_120314FF&REV_06\3&61AAA01&0&89 | |
[Chip Enable] | ||
Primary IDE Channel: | Enabled | |
Secondary IDE Channel: | Enabled | |
[IDE Configuration I] | ||
Primary IDE Read Prefetch Buffer: | Enabled | |
Primary IDE Post Write Buffer: | Enabled | |
Secondary IDE Read Prefetch Buffer: | Enabled | |
Secondary IDE Post Write Buffer: | Enabled | |
[IDE Configuration II] | ||
PIO Operating Mode - Primary Channel: | Compatibility Mode | |
PIO Operating Mode - Secondary Channel: | Compatibility Mode | |
[FIFO Configuration] | ||
FIFO Configuration: | PRI = 16, SEC = 0 | |
Primary Channel FIFO Threshold: | 1/2 | |
Secondary Channel FIFO Threshold: | 1/2 | |
[Miscellaneous Control 1] | ||
Master Read Cycle IRDY# Wait State: | 0 WS | |
Master Write Cycle IRDY# Wait State: | 0 WS | |
FIFO Output Data 1/2 Clock Advance/PIO Read Pre-Fetch Byte Counter: | Enabled | |
Bus-Master IDE Status Register Read Retry: | Enabled | |
Packet Command Prefetching: | Disabled | |
UltraDMA Host Must Wait for First Transfer Before Termination: | Enabled | |
[Miscellaneous Control 2] | ||
Interrupt Steering Swap Between Channels: | Disabled | |
Rx3C Write Protect: | Enabled | |
Memory-Read-Multiple Command: | Enabled | |
Memory-Write-and-Invalidate Command: | Enabled | |
[Miscellaneous Control 3] | ||
Read DMA FIFO Flush (PRI): | Enabled | |
Read DMA FIFO Flush (SEC): | Enabled | |
End-of-Sector FIFO Flush (PRI): | Disabled | |
End-of-Sector FIFO Flush (SEC): | Disabled | |
Maximum DRDY# Pulse Width: | Unlimited | |
[Drive Timing Control] | ||
Primary Drive 0 Active Pulse Width: | 3 clocks | |
Primary Drive 0 Recovery Time: | 1 PCICLKs | |
Primary Drive 1 Active Pulse Width: | 2 PCICLKs | |
Primary Drive 1 Recovery Time: | 2 clocks | |
Secondary Drive 0 Active Pulse Width: | 3 clocks | |
Secondary Drive 0 Recovery Time: | 1 PCICLKs | |
Secondary Drive 1 Active Pulse Width: | 2 PCICLKs | |
Secondary Drive 1 Recovery Time: | 2 clocks | |
[Address Setup Time] | ||
Primary Drive 0 Address Setup Time: | 4T | |
Primary Drive 1 Address Setup Time: | 4T | |
Secondary Drive 0 Address Setup Time: | 4T | |
Secondary Drive 1 Address Setup Time: | 4T | |
[Secondary Non-01F0h Port Access Timing] | ||
DIOR#/DIOW# Active Pulse Width: | 12 PCICLKs | |
DIOR#/DIOW# Recovery Time: | 7 PCICLKs | |
[Primary Non-01F0h Port Access Timing] | ||
DIOR#/DIOW# Active Pulse Width: | 12 PCICLKs | |
DIOR#/DIOW# Recovery Time: | 7 PCICLKs | |
[Ultra-DMA Extended Timing Control (SEC DRV 1)] | ||
Ultra-DMA Mode Enable Method: | Using Set Feature Cmd. | |
Ultra-DMA Mode: | Disabled | |
Transfer Mode: | DMA or PIO | |
Cable Type Reporting: | 40-pin | |
Drive Cycle Time: | 9T | |
[Ultra-DMA Extended Timing Control (SEC DRV 0)] | ||
Ultra-DMA Mode Enable Method: | Using this reg. | |
Ultra-DMA Mode: | Enabled | |
Transfer Mode: | Ultra-DMA | |
Cable Type Reporting: | 40-pin | |
Drive Cycle Time: | 6T | |
[Ultra-DMA Extended Timing Control (PRI DRV 1)] | ||
Ultra-DMA Mode Enable Method: | Using Set Feature Cmd. | |
Ultra-DMA Mode: | Disabled | |
Transfer Mode: | DMA or PIO | |
Cable Type Reporting: | 40-pin | |
Drive Cycle Time: | 9T | |
[Ultra-DMA Extended Timing Control (PRI DRV 0)] | ||
Ultra-DMA Mode Enable Method: | Using this reg. | |
Ultra-DMA Mode: | Enabled | |
Transfer Mode: | Ultra-DMA | |
Cable Type Reporting: | 80-pin | |
Drive Cycle Time: | 2T | |
[Ultra-DMA FIFO Control] | ||
Lower ISA Request Priority When Write Device Packet Command is Issued: | Disabled | |
Clear Native Mode Interrupt on Falling Edge of Gated Interrupt: | Disabled | |
Improve PIO Prefetch and Post-Write Performance: | Enabled | |
Memory Prefetch Size: | 2 lines | |
Change Drive Clears All FIFO & Internal States: | Enabled | |
Complete DMA Cycle with Transfer Size Less Than FIFO Size: | Enabled | |
[IDE Clock Gating] | ||
Dynamic 100/133 MHz Clock Gating: | Enabled | |
Dynamic 66 MHz Clock Gating: | Enabled | |
[Primary Sector Size] | ||
Sector Size: | 512 Bytes/Sector | |
[Secondary Sector Size] | ||
Sector Size: | 512 Bytes/Sector |
VIA VT8233(A) USB Universal Host Controller |
[General Information] | ||
Device Name: | VIA VT8233(A) USB Universal Host Controller | |
Original Device Name: | VIA VT8233(A) USB Universal Host Controller | |
Device Class: | USB UHCI Controller | |
Revision ID: | 23 | |
PCI Address (Bus:Device:Function) Number: | 0:17:2 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_3038&SUBSYS_12340925&REV_23 | |
[System Resources] | ||
Interrupt Line: | IRQ5 | |
Interrupt Pin: | INTD# | |
I/O Base Address 4 | D400 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
USB Version Supported: | 1.0 | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies | |
Driver Description: | VIA Rev 5 or later USB Universal Host Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.5512 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3038&SUBSYS_12340925&REV_23\3&61AAA01&0&8A | |
[Miscellaneous Control 1] | ||
PCI Memory Commands Support: | MRL, MRM, and MWAI | |
Babbled Port of EOF: | Enabled | |
PCI Parity Checking: | Disabled PERR# | |
Frame Interval Select: | 1 msec | |
USB Data Length Limit: | 1280 bytes | |
USB Power Management/Improved FIFO Latency: | Disabled | |
DMA Limited To: | 16-DW Burst | |
PCI Wait States: | 0 WS | |
[Miscellaneous Control 2] | ||
USB 1.1 Improvement for EOP: | Disabled (USB 1.0) | |
Trap Status Bits Override: | Disabled | |
A20GATE Pass Through Option: | Don't Pass | |
[Miscellaneous Control 4] | ||
Continue Transmission of Erroneous Data on FIFO Underrun: | Enabled | |
Issue CRC Error Instead of Stuffing Error on FIFO Underrun: | Enabled | |
[Miscellaneous Control 5] | ||
Issue Bad CRC5 in SOF After FIFO Underrun: | Enabled | |
Lengthen PreSOF Time: | Enabled | |
Issue Nonzero Bad CRC Code on FIFO Underrun: | Non zero CRC | |
[Miscellaneous Control 6] | ||
EHCI Supports PME Assertion in D3 Cold State: | Not Supported | |
UHCI Supports PME Assertion in D3 Cold State: | Not Supported | |
[Miscellaneous Control 7] | ||
Use External 60 MHz Clock: | Disabled | |
[USB Release Number] | ||
USB Release Number: | 1.0 | |
[USB Legacy Support] | ||
UHCI v1.1 Compliant: | 2000 |
USB Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA VT8233(A) USB Universal Host Controller |
[General Information] | ||
Device Name: | VIA VT8233(A) USB Universal Host Controller | |
Original Device Name: | VIA VT8233(A) USB Universal Host Controller | |
Device Class: | USB UHCI Controller | |
Revision ID: | 23 | |
PCI Address (Bus:Device:Function) Number: | 0:17:3 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_3038&SUBSYS_12340925&REV_23 | |
[System Resources] | ||
Interrupt Line: | IRQ5 | |
Interrupt Pin: | INTD# | |
I/O Base Address 4 | D800 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
USB Version Supported: | 1.0 | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies | |
Driver Description: | VIA Rev 5 or later USB Universal Host Controller | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.5512 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3038&SUBSYS_12340925&REV_23\3&61AAA01&0&8B | |
[Miscellaneous Control 1] | ||
PCI Memory Commands Support: | MRL, MRM, and MWAI | |
Babbled Port of EOF: | Enabled | |
PCI Parity Checking: | Disabled PERR# | |
Frame Interval Select: | 1 msec | |
USB Data Length Limit: | 1280 bytes | |
USB Power Management/Improved FIFO Latency: | Disabled | |
DMA Limited To: | 16-DW Burst | |
PCI Wait States: | 0 WS | |
[Miscellaneous Control 2] | ||
USB 1.1 Improvement for EOP: | Disabled (USB 1.0) | |
Trap Status Bits Override: | Disabled | |
A20GATE Pass Through Option: | Don't Pass | |
[Miscellaneous Control 4] | ||
Continue Transmission of Erroneous Data on FIFO Underrun: | Enabled | |
Issue CRC Error Instead of Stuffing Error on FIFO Underrun: | Enabled | |
[Miscellaneous Control 5] | ||
Issue Bad CRC5 in SOF After FIFO Underrun: | Enabled | |
Lengthen PreSOF Time: | Enabled | |
Issue Nonzero Bad CRC Code on FIFO Underrun: | Non zero CRC | |
[Miscellaneous Control 6] | ||
EHCI Supports PME Assertion in D3 Cold State: | Not Supported | |
UHCI Supports PME Assertion in D3 Cold State: | Not Supported | |
[Miscellaneous Control 7] | ||
Use External 60 MHz Clock: | Disabled | |
[USB Release Number] | ||
USB Release Number: | 1.0 | |
[USB Legacy Support] | ||
UHCI v1.1 Compliant: | 2000 |
USB Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA AC'97 Enhanced Audio Controller |
[General Information] | ||
Device Name: | VIA AC'97 Enhanced Audio Controller | |
Original Device Name: | VIA AC'97 Enhanced Audio Controller | |
Device Class: | Multimedia Audio Adapter | |
Revision ID: | 30 | |
PCI Address (Bus:Device:Function) Number: | 0:17:5 | |
PCI Latency Timer: | 0 | |
Hardware ID: | PCI\VEN_1106&DEV_3059&SUBSYS_040314FF&REV_30 | |
[System Resources] | ||
Interrupt Line: | IRQ10 | |
Interrupt Pin: | INTC# | |
I/O Base Address 0 | FA00 | |
[Features] | ||
Bus Mastering: | Disabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies, Inc. | |
Driver Description: | VIA AC'97 Enhanced Audio Controller (WDM) | |
Driver Provider: | VIA Technologies, Inc. | |
Driver Version: | 6.14.1.3850 | |
Driver Date: | 26-Feb-2003 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3059&SUBSYS_040314FF&REV_30\3&61AAA01&0&8D |
VIA AC'97 Modem Controller |
[General Information] | ||
Device Name: | VIA AC'97 Modem Controller | |
Original Device Name: | VIA AC'97 Modem Controller | |
Device Class: | Other Communication Device | |
Revision ID: | 70 | |
PCI Address (Bus:Device:Function) Number: | 0:17:6 | |
PCI Latency Timer: | 0 | |
Hardware ID: | PCI\VEN_1106&DEV_3068&SUBSYS_100514FF&REV_70 | |
[System Resources] | ||
Interrupt Line: | IRQ10 | |
Interrupt Pin: | INTC# | |
I/O Base Address 0 | E000 | |
[Features] | ||
Bus Mastering: | Disabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
[Driver Information] | ||
Driver Manufacturer: | Motorola Inc | |
Driver Description: | Motorola SM56 Data Fax Modem | |
Driver Provider: | Motorola Inc | |
Driver Version: | 6.12.25.5 | |
Driver Date: | 05-May-2009 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3068&SUBSYS_100514FF&REV_70\3&61AAA01&0&8E |
VIA VT6102 Rhine II Fast Ethernet Adapter |
[General Information] | ||
Device Name: | VIA VT6102 Rhine II Fast Ethernet Adapter | |
Original Device Name: | VIA VT6102 Rhine II Fast Ethernet Adapter | |
Device Class: | Ethernet Adapter | |
Revision ID: | 70 | |
PCI Address (Bus:Device:Function) Number: | 0:18:0 | |
PCI Latency Timer: | 32 | |
Hardware ID: | PCI\VEN_1106&DEV_3065&SUBSYS_020414FF&REV_70 | |
[System Resources] | ||
Interrupt Line: | IRQ10 | |
Interrupt Pin: | INTA# | |
I/O Base Address 0 | D000 | |
Memory Base Address 1 | DFFFFE00 | |
[Features] | ||
Bus Mastering: | Enabled | |
Running At 66 MHz: | Not Capable | |
Fast Back-to-Back Transactions: | Not Capable | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies, Inc. | |
Driver Description: | VIA Compatable Fast Ethernet Adapter | |
Driver Provider: | Microsoft | |
Driver Version: | 2.66.0.290 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3065&SUBSYS_020414FF&REV_70\3&61AAA01&0&90 |
ISA/VLB Bus |
Video Adapter |
NVIDIA GeForce4 420 Go 32M |
[Video Chipset] | ||
Video Chipset: | NVIDIA GeForce4 420 Go 32M | |
Video Chipset Codename: | NV17M | |
Video Memory: | 32 MBytes of DDR SDRAM | |
[Video Card] | ||
Video Card: | NVIDIA MAP17-232 [Twinhead] | |
Video Bus: | AGP 4X @ 4X | |
Video RAMDAC: | Integrated RAMDAC | |
Video BIOS Version: | 4.17.00.59.41 | |
Video Chipset Revision: | A3 | |
[Performance] | ||
Graphics Processor Clock: | 199.1 MHz | |
Graphics Memory Clock: | 202.5 MHz (Effective 405.0 MHz) | |
Graphics Memory Bus Width: | 64-bit | |
NVIDIA SLI Status: | Not Present | |
Resizable BAR (ReBAR) Support: | Not Supported | |
Hardware ID: | PCI\VEN_10DE&DEV_0176&SUBSYS_030B14FF&REV_A3 | |
PCI Location (Bus:Dev:Fnc): | 1:00:0 | |
[Driver Information] | ||
Driver Manufacturer: | NVIDIA | |
Driver Description: | NVIDIA MAP17-232 | |
Driver Provider: | NVIDIA | |
Driver Version: | 6.14.10.9420 (ForceWare 94.20) | |
Driver Date: | 30-Nov-2006 | |
DCH/UWD Driver: | Not Capable | |
DeviceInstanceId | PCI\VEN_10DE&DEV_0176&SUBSYS_030B14FF&REV_A3\4&26E5833C&0&0008 |
Monitor |
Unknown |
[General Information] | ||
Monitor Name: | Unknown | |
Monitor Name (Manuf): | Nvidia Default Flat Panel | |
Serial Number: | Unknown | |
Date Of Manufacture: | Week: 45, Year: 2002 | |
Monitor Hardware ID: | Monitor\NVD0000 | |
Max. Vertical Size: | 24 cm | |
Max. Horizontal Size: | 32 cm | |
Horizontal Frequency: | 29 - 49 kHz | |
Vertical Frequency: | 0 - 60 Hz | |
Maximum Pixel Clock: | 70 MHz | |
[Advanced parameters] | ||
Input Signal: | Digital | |
Gamma Factor: | 1.00 | |
[DPMS Modes] | ||
Standby: | Supported | |
Suspend: | Supported | |
Active Off: | Supported | |
Standard Colour Space (sRGB) Default: | Not Supported | |
Preferred Timing Mode: | Supported | |
Default GTF (Continuous Frequency): | Not Supported | |
DFP 1.x Compatible: | No | |
[Supported Video Modes] | ||
1024 x 768 | 322 x 241 mm, Pixel Clock 65.00 MHz |
Drives |
(S)ATA/ATAPI Drives |
SH00M128GB |
[General Information] | ||
Drive Controller: | Serial ATA 3Gb/s | |
Host Controller: | Primary IDE Channel | |
Drive Model: | SH00M128GB | |
Drive Firmware Revision: | HC1A254P | |
Drive Serial Number: | YM82607200033 | |
World Wide Name: | 0000 | |
Drive Capacity: | 122,104 MBytes (128 GB) | |
Drive Capacity [MB]: | 122104 | |
Media Rotation Rate: | SSD Drive (Non-rotating) | |
Nominal Form Factor: | 2.5" | |
ATA Major Version Supported: | ATA/ATAPI-5, ATA/ATAPI-6, ATA/ATAPI-7, ATA8-ACS, ACS-2 | |
ATA Minor Version Supported: | ACS-2 Revision 3 | |
ATA Transport Version Supported: | SATA 3.2 | |
[Drive Geometry] | ||
Number of Cylinders: | 16383 | |
Number of Heads: | 16 | |
Sectors Per Track: | 63 | |
Number of Sectors: | 16514064 | |
Total 32-bit LBA Sectors: | 250069680 | |
Total 48-bit LBA Sectors: | 250069680 | |
Logical Sector Size: | 512 Bytes | |
Cache Buffer Size: | N/A | |
[Transfer Modes] | ||
Sectors Per Interrupt: | Total: 8, Active: 8 | |
Max. PIO Transfer Mode: | 4 | |
Multiword DMA Mode: | Total: 2, Active: - | |
Singleword DMA Mode: | Total: -, Active: - | |
Ultra-DMA Mode: | Total: 6 (ATA-133), Active: 5 (ATA-100) | |
Max. Multiword DMA Transfer Rate: | 16.7 MBytes/s | |
Max. PIO with IORDY Transfer Rate: | 16.7 MBytes/s | |
Max. PIO w/o IORDY Transfer Rate: | 16.7 MBytes/s | |
Native Command Queuing: | Not Supported | |
TRIM Command: | Supported (Indeterminate Read After TRIM) | |
[Device flags] | ||
Fixed Drive: | Present | |
Removable Drive: | Not Present | |
Magnetic Storage: | Present | |
LBA Mode: | Supported | |
DMA Mode: | Supported | |
IORDY: | Supported | |
IORDY Disableable: | Supported | |
[Features] | ||
Write Cache: | Present, Active | |
S.M.A.R.T. Feature: | Present, Active | |
Security Feature: | Present, Inactive | |
Removable Media Feature: | Not Present, Disabled | |
Power Management: | Present, Active | |
Advanced Power Management: | Not Present, Inactive | |
Packet Interface: | Not Present, Disabled | |
Look-Ahead Buffer: | Present, Active | |
Host Protected Area: | Not Present, Enabled | |
Power-Up In Standby: | Not Supported, Inactive | |
Automatic Acoustic Management: | Not Supported, Inactive | |
48-bit LBA: | Supported, Active | |
Host-Initiated Link Power Management (HIPM): | Not Supported | |
Device-Initiated Link Power Management (DIPM): | Not Supported | |
In-Order Data Delivery: | Not Supported | |
Hardware Feature Control: | Not Supported | |
Software Settings Preservation: | Not Supported | |
NCQ Autosense: | Not Supported | |
Link Power State Device Sleep: | Not Supported | |
Hybrid Information Feature: | Not Supported | |
Rebuild Assist: | Not Supported | |
Power Disable: | Not Supported | |
All Write Cache Non-Volatile: | Not Supported | |
Extended Number of User Addressable Sectors: | Not Supported | |
CFast Specification: | Not Supported | |
NCQ Priority Information: | Not Supported | |
Host Automatic Partial to Slumber Transitions: | Not Supported | |
Device Automatic Partial to Slumber Transitions: | Not Supported | |
NCQ Streaming: | Not Supported | |
NCQ Queue Management Command: | Not Supported | |
DevSleep to Reduced Power State: | Not Supported | |
Out Of Band Management Interface: | Not Supported | |
Extended Power Conditions Feature: | Not Supported | |
Sense Data Reporting Feature: | Not Supported | |
Free-Fall Control Feature: | Not Supported | |
Write-Read-Verify Feature: | Not Supported | |
[Security] | ||
Security Feature: | Supported | |
Security Status: | Disabled | |
Security Locked: | Disabled | |
Security Frozen: | Enabled | |
Enhanced Security Erase: | Supported | |
Sanitize Feature: | Supported | |
Sanitize Device - Crypto Scramble: | Not Supported | |
Sanitize Device - Overwrite: | Not Supported | |
Sanitize Device - Block Erase: | Supported | |
Sanitize Device - Antifreeze Lock: | Not Supported | |
Device Encrypts All User Data: | Not Supported | |
Trusted Computing: | Not Supported | |
[Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)] | ||
[01] Raw Read Error Rate: | 100/50, Worst: 100 | |
[05] Reallocated Sector Count: | 100/50, Worst: 100 | |
[09] Power-on Hours/Cycle Count: | 100/50, Worst: 100 (61 hours / 2.5 days) | |
[0C] Power Cycle Count: | 100/50, Worst: 100 (Data = 26,0) | |
[A0] Initial Bad Block Count: | 100/50, Worst: 100 (Data = 14,0) | |
[A1] Current Bad Block Count: | 100/50, Worst: 100 (Data = 100,0) | |
[A3] Max PE Cycle: | 100/50, Worst: 100 (Data = 192,0) | |
[A4] Average Erase Count: | 100/50, Worst: 100 | |
[A5] Initial Bad Block Count: | 100/50, Worst: 100 | |
[A6] Min W/E Cycle: | 100/50, Worst: 100 | |
[A7] SSD Protect Mode: | 100/50, Worst: 100 | |
[A8] SATA PHY Error Count: | 100/50, Worst: 100 | |
[A9] Total Bad Block Count: | 100/50, Worst: 100 (Data = 100,0) | |
[AF] Program/ECC Fail Count: | 100/50, Worst: 100 | |
[B0] Erase Fail Count: | 100/50, Worst: 100 (Data = 319,0) | |
[B1] Wear Leveling Count: | 100/50, Worst: 100 (Data = 62283,0) | |
[B2] Used Reserved Block Count (Chip): | 100/50, Worst: 100 | |
[B5] Program Fail Count (Total): | 100/50, Worst: 100 | |
[B6] Erase Fail Count (Total): | 100/50, Worst: 100 | |
[C0] Unsafe Shutdown Count: | 100/50, Worst: 100 (Data = 23,0) | |
[C2] Temperature: | 100/50, Worst: 100 (40.0 °C) | |
[C3] ECC Error Rate: | 100/50, Worst: 100 | |
[C4] Reallocation Event Count: | 100/50, Worst: 100 | |
[C5] Current Pending Sector Count: | 100/50, Worst: 100 | |
[C6] Off-Line Uncorrectable Sector Count: | 100/50, Worst: 100 | |
[C7] SATA CRC Error Count: | 100/50, Worst: 100 | |
[E8] Available Reserved Space: | 100/50, Worst: 100 (Data = 100,0) | |
[F1] Total Host Writes: | 100/50, Worst: 100 (Data = 2327,0) | |
[F2] Total Host Reads: | 100/50, Worst: 100 (Data = 2164,0) | |
[F5] Cumulative Program NAND Pages: | 100/50, Worst: 100 (Data = 5536,0) | |
[Device Statistics] | ||
Lifetime Power-On Resets: | 26 | |
Power-on Hours: | 61 | |
Logical Sectors Written: | 152502272 | |
Logical Sectors Read: | 141819904 | |
Number of Write Commands: | 2948492 | |
Number of Read Commands: | 4067142 | |
QSI DVD/CDRW SBW-161 |
[General Information] | ||
Drive Model: | QSI DVD/CDRW SBW-161 | |
Drive Firmware Revision: | SX09 | |
Device Type: | Combo CD-R Writer | |
[Device Capabilities] | ||
Drive can read: | CD-R, CD-RW, DVD-R, DVD-RW | |
Drive can write: | CD-R, CD-RW |
Audio |
VIA AC'97 Enhanced Audio Controller |
Audio Adapter: | VIA AC'97 Enhanced Audio Controller | |
Audio Controller Hardware ID: | PCI\VEN_1106&DEV_3059&SUBSYS_040314FF&REV_30 | |
AC'97 Codec: | VIA VT1612A | |
AC'97 Codec ID: | 56494161 | |
[AC'97 Capabilities] | ||
Variable Rate Audio: | Supported | |
Double Rate Audio: | Not Supported | |
SPDIF Output: | Not Supported | |
Variable Rate Microphone ADC: | Not Supported | |
Center DAC: | Not Supported | |
Surround DACs: | Not Supported | |
LFE DAC: | Not Supported | |
Dedicated Microphone PCM Channel: | Not Supported | |
Modem Functions: | Not Supported | |
Bass and Treble Control: | Not Supported | |
Simulated Stereo: | Not Supported | |
Headphone Output: | Supported | |
Bass boost: | Not Supported | |
DAC Resolution: | 18-bit | |
ADC Resolution: | 18-bit |
Network |
VIA VT6102 Rhine II Fast Ethernet Adapter |
[General Information] | ||
Network Card: | VIA VT6102 Rhine II Fast Ethernet Adapter | |
Vendor Description: | VIA PCI 10/100Mb Fast Ethernet Adapter | |
MAC Address: | 00-40-45-08-29-D7 | |
[Capabilities] | ||
Maximum Link Speed: | 10 Mbps | |
Transmit Buffer Size: | 49152 Bytes | |
Receive Buffer Size: | 147456 Bytes | |
Hardware ID: | PCI\VEN_1106&DEV_3065&SUBSYS_020414FF&REV_70 | |
[Driver Information] | ||
Driver Manufacturer: | VIA Technologies, Inc. | |
Driver Description: | VIA Compatable Fast Ethernet Adapter | |
Driver Provider: | Microsoft | |
Driver Version: | 2.66.0.290 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | PCI\VEN_1106&DEV_3065&SUBSYS_020414FF&REV_70\3&61AAA01&0&90 |
1394 Net Adapter |
[General Information] | ||
Network Card: | 1394 Net Adapter | |
Vendor Description: | NET IP/1394 Miniportt Ethernet Adapter | |
MAC Address: | F2-08-8E-6B-60-69 | |
[Capabilities] | ||
Maximum Link Speed: | 400 Mbps | |
Physical Media: | IEEE1394 FireWire | |
Transmit Buffer Size: | Unknown | |
Receive Buffer Size: | Unknown |
Ports |
Serial Ports |
COM1 |
USB |
VIA Rev 5 or later USB Universal Host Controller |
Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA Rev 5 or later USB Universal Host Controller |
Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA Rev 5 or later USB Universal Host Controller |
Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA Rev 5 or later USB Universal Host Controller |
Root Hub |
[Port1] : No Device Connected |
[Port2] : No Device Connected |
VIA USB 2.0 Enhanced Host Controller |
Root Hub |
[Port1] : SanDisk Ultra Flair |
[Device Information] | ||
Device Manufacturer: | SanDisk | |
Product Name: | Ultra USB 3.0 | |
Serial Number: | 0101a5827dc5b1f19875e9d2538d44674aa2d7bcbb805a3a848eda8ab83815c28a9600000000000000000000284600bcff99210091558107b5a6ddd8 | |
USB Version Supported: | 3.00 (Connected to a USB 2.00 Port) | |
USB Device Speed: | USB 2.0 High-speed | |
Driver Description: | USB Mass Storage Device | |
Hardware ID: | USB\VID_0781&PID_5591 | |
[Driver Information] | ||
Driver Manufacturer: | Compatible USB storage device | |
Driver Description: | USB Mass Storage Device | |
Driver Provider: | Microsoft | |
Driver Version: | 5.1.2600.0 | |
Driver Date: | 01-Jul-2001 | |
DeviceInstanceId | USB\VID_0781&PID_5591\0101A5827DC5B1F19875E9D2538D44674AA2D7BCBB805A3A848EDA8AB83815C28A9600000000000000000000284600BCFF99210091558107B5A6DDD8 |
[Port2] : No Device Connected |
[Port3] : No Device Connected |
[Port4] : No Device Connected |
Smart Battery |
Battery #0 |
[General Properties] | ||
Device Name: | P14G | |
Manufacturer Name: | Twinhead | |
Unique ID: | 00002 TwinheadP14G | |
Chemistry: | ||
Designed Capacity: | 4000 mWh | |
Full Charged Capacity: | 4279 mWh | |
Wear Level: | 0.0 % | |
[Current Power Status] | ||
Power Status: | Critical Discharging On AC Power | |
Current Capacity: | 0 mWh (0.0 %) | |
Current Voltage: | 8.273 V | |
Discharge Rate: | -1500 mW |